The »Dvicenter« Kvm Matrix System - G&D DVICenter DP16 Installationsanleitung

The »DVICenter« KVM matrix system
The »DVICenter« KVM matrix system
KVM matrix systems of the DVICenter series consist of at least one central module,
one user module and one target module.
The central module of the DVICenter series is the central device of the KVM matrix
system. Both target and user modules are connected to the central module.
You can use the KVM matrix system to access a target module with a user module.
By accessing the computer that is connected to the target module, the video image is
displayed at the console monitor. You can now operate the accessed computer with
console keyboard and console mouse.
The 16 Dynamic Ports can be configured in order to connect a user module or a target
module. In the default setting, the ports 1 to 4 are configured for connecting the user
modules. The ports 5 to 16 are configured for connecting the target modules.
NOTE: You can change the port assignment as described on page 14.
By cascading the KVM matrix system, the number of target modules can be increased.
Detailed information regarding this topic is given on page 18 ff.
The installation of devices of the KVM matrix system is described in the following
paragraphs.
G&D DVICenter DP16 · 2