Inhaltsverzeichnis
Werbung
Cleaning the Print Head
If you click Cleaning on the Pattern Check dialog box that appears after printing the nozzle check pattern,
the printer starts cleaning the Print Head. Make sure that a sheet of A4 or Letter-sized plain paper are
loaded in the Rear Tray, then go to the procedure of (3) in step 3.
1.
Make sure that the power is turned on and a sheet of A4 or Letter-sized paper are
loaded in the Rear Tray.
Set the Paper Thickness Lever to the left. See
2.
Open the Canon IJ Printer Utility dialog box.
Opening the Canon IJ Printer Utility (Macintosh)
See
3.
Clean the Print Head.
Make sure that Cleaning is selected in the pop-up menu.
(1)
Click Cleaning.
(2)
Confirm the displayed message and click OK.
(3)
The printer starts cleaning the Print Head when the
Do not perform any other operations until the printer completes the cleaning of the Print Head. This takes
about 1 minute.
Note
Clicking Initial Check Items displays the items to be checked before cleaning.
Confirm the displayed message and click Print Check Pattern.
(4)
The nozzle check pattern is printed.
Do not perform any other operations until the printer completes the printing of the nozzle check pattern.
4.
Check the printed nozzle check pattern.
Examining the Nozzle Check Pattern
See
Note
If the problem is not resolved after cleaning the Print Head twice, clean the Print Head deeply.
Cleaning the Print Head Deeply
See
Front View
.
.
lamp starts flashing green.
Power
.
.
Стр. 39 из 342 стр.
Page top
Werbung
Inhaltsverzeichnis
