Safety Instructions For The Use Of The Product; Maintenance, Service And Troubleshooting - ABNOX AXKP1-Serie Originalbetriebsanleitung

EN

Safety Instructions for the Use of the Product

All parts and assemblies were developed and built according to recognised safety-
related rules. Nevertheless, improper use or handling may result in hazards for the
user or third parties or damage to the product or other material assets.
The product may only be used:
• according to the intended use.
• in perfect condition from a safety point of view.
Hydraulic and pneumatic energy hazards
Depending on the version, the product works with high hydraulic or pneumatic
pressure (see technical data). Sections of the system that need to be opened, such
as pressure lines, valves or loads, have to be de-pressurised before the start of
repairs. No residual pressure is permitted to remain.
Hazards due to lubricants
The safety notices and instructions of the lubricant manufacturer have to be observed
and followed. The manufacturer of this product disclaims any liability for incidents
resulting from failure to follow the regulations, instructions and recommendations of
the lubricant manufacturer.
Use eye protection
Mandatory instruction for the use of protective goggles.

Maintenance, Service and Troubleshooting

• Prescribed adjustment and maintenance tasks according to the maintenance
schedule have to be carried out in a timely manner.
• Inform the operating personnel about adjustment and maintenance work.
• The master switch (if any) has to be turned off.
• Disconnect the energy supply from the network and secure it against
unintentional reconnection.
• Pneumatic and/or hydraulic systems must be de-pressurised.
• Check all threaded connections and fittings for tightness.
• All safety devices and operating functions have to be checked after completion
of the work.
CAUTION
The product always has to be shut off prior to all work.
26