Automatic Time Limit; Basic Settings; Changing The Basic Settings - CONSTRUCTA CA323350 Gebrauchsanleitung

Automatic time limit

If a hotplate is in use for a long time without the setting being
changed, the automatic time limit is activated.
The hotplate stops heating. " and ‰ flash alternately in the
hotplate indicator.

Basic settings

Your appliance has various basic settings. You can adapt these
settings to your needs.
Indicator Function
Automatic childproof lock
™‚
‹ Switched off.*
‚ Switched on.
Audible signal
™ƒ
‹ Confirmation signal and operation error signal switched off.
‚ Only operation error signal switched on.
ƒ Confirmation signal and operation error signal switched on.*
Activation of the filament circuits
™ˆ
‹ Switched off.
‚ Switched on.
ƒ Last setting before the hotplate was switched off.*
Reset to basic setting
™‹
‹ Switched off.
‚ Switched on.
*Basic setting

Changing the basic settings

The hob must be switched off.
Switch on the hob.
1.
Within the next 10 seconds, touch the æ symbol for
2.
4 seconds.
B
 
™ and ‚ flash alternately in the left-hand display; ‹ lights up in
the right-hand display.
Touch the æ symbol repeatedly until the desired symbol
3.
appears on the left-hand display.
Touch the + symbol repeatedly until the desired setting
4.
appears in the display.
B B
 
The display goes out when you touch any control. You can
make new settings.
When the time limit is activated depends on the heat setting
selected (1 to 10 hours).
B
 
Touch the æ symbol for 4 seconds.
5.
The setting is activated.
Switching off
To exit the basic setting, switch off the hob with the main switch
and make new settings.
B B
 
25