Standby Mode Upgrade - Samsung HT-E6750W Bedienungsanleitung

Settings
By Disc
1 . Visit www.samsung.com.
2 . Click SUPPORT on the top right of the page.
3 . Enter the product's model number into the
search field, and then click Find Product.
4 . Click Get downloads in the centre of the
page below the Downloads header.
5 . Click Firmware in the centre of the page.
6 . Click the ZIP icon in the File column on the
right side of the page.
7 . Click OK in the pop-up that appears to
download and save the firmware file to your
PC.
8 . Unzip the zip archive to your computer. You
should have a single .RUF file.
9 . Write the RUF file onto a disc. We
recommend a CD-R or DVD-R.
10 . Finalise the disc before you remove it from
your computer.
11 . Insert the disc into the product.
12 . In the product's menu, go to Settings >
Support > Software Update.
13 . Select By Disc.
| NOTE |
\ When the system upgrade is done, check the software
details in the Software Update menu.
\ Do not turn off the product during the Software Update.
It may cause the product malfunction.
By downloaded
The By downloaded option lets you upgrade using
a file the product downloaded earlier but you
decided not to install immediately.
1 . If upgrade software has been downloaded,
you will see the software version number to
the right of By downloaded.
2 . Select By downloaded, and then press the
E button.
3 . The product displays a message asking if you
want to upgrade. Select Yes. The product
begins the upgrade.
38
|
English
HT-E6750W_XU_0222.indd 38 HT-E6750W_XU_0222.indd 38
4 . When the update is complete, the product
turns off automatically, and then turns on.
| NOTE |
\ When the system upgrade is done, check the software
details in the Software Update menu.
\ Do not turn off the product during the software upgrade.
It may cause the product to malfunction.

Standby Mode Upgrade

You can set the Standby Mode Upgrade function
so that the product downloads new upgrade
software when it is in Standby mode.
In Standby mode, the product is off, but its
Internet connection is active. This allows
the product to download upgrade software
automatically, when you are not using it.
1 . Press the ▲▼ buttons to select Standby
Mode Upgrade, and then press the E
button.
2 . Select On or Off.
If you select On, the product will automatically
download new upgrade software when it
is in Standby mode with the power off. If
it downloads new upgrade software, the
product will ask you if you want to install it
when you turn the product on.
| NOTE |
\ To use Standby Mode Upgrade function, your product
must be connected to the Internet.
\ If this function does not appear, you can upgrade to the
latest software and use it.
2012-02-22 오후 2:07:49 2012-02-22 오후 2:07:49