D-Link DCS-4612EK Schnellinstallationsanleitung Seite 4

DCS-4618EK Front/Side
1
2
3
Figure 2: Front View Features
# Feature
Vertical Loosen to adjust the vertical
1 Adjustment angle of the camera.
Screw
Provides illumination for low-
2 IR LED
light environments
3 Camera Lens Motorized camera lens
microSD Slot for microSD card.
4
Slot
Monitors lighting conditions
5 Light Sensor and switches between color and
infrared accordingly
Table 2: Front View Descriptions
2
4
5
Description
DCS-4612EK/DCS-4614EK/DCS-
4618EK Cable Interfaces
1
2
3
Figure 3: Cable Interfaces
# Feature
RJ-45 connector for Ethernet. Can
Ethernet
1 also be used to power the camera
Jack
using Power over Ethernet (PoE)
Power Connects to an optional 12 V / 1.5 A
2
Connector power adapter (not included)
Press and hold for more than five
Reset
3 seconds, then release to perform
Button
a factory reset
Table 3: Cable Interface Descriptions
Management Options
To configure and manage your camera, it
is recommended that you download the
associated Setup Wizard and the D-ViewCam
software suite, both of which are available from
the D-Link website.
Installing the Setup Wizard
1. Open a web browser, navigate to
dlink.com/support/, and select your
region.
2. On the next screen, enter the model
number of your camera in the search bar
and click Search. Click the picture of your
camera. On the product page, click the
Download button next to Setup Wizard.
3. Once the executable file has finished
downloading, click it and follow the
instructions to install the Setup Wizard.
Quick Installation Guide
Description