Setting The Functions; Remote Control - be cool BC100TU2166F Bedienungsanleitung

DISPLAY
When setting the functions, the respective symbols light up on the display:
Ionizer
Indicator
Timer & Speed
Indicator

REMOTE CONTROL

Please follow the steps below to make it operate correctly:
1. Preparing the remote control – inserting or replacing batteries
Please follow these instructions:
1. Remove the cover on the back of the remote control.
2. Now insert the Typ R03 "AAA" 1,5V batteries
information on the inside of the battery compartment to properly
insert the batteries.
3. Now put the cover back onto the remote control.
If the remote control has to be replaced or disposed of, you must take the batteries out and
dispose of them in accordance with the applicable regulations! Also remove the batteries in
case you won't use the remote control for a longer period of time to avoid corrosion damage.
If you have to replace batteries always replace them with the same type and charge status.

SETTING THE FUNCTIONS

Swing
Indicator
NOTE
Seite 15 von 19
Sleeping
Indicator
Speed

Observe the
Speed-
Indicator
Timer Indicator
sator