Changing The Selections After Programme Has Started; Cancelling The Programme - Beko WTE10741BSCDOS1 Bedienungsanleitung

4.3.12 Changing the selections after programme has started

Adding laundry after the programme has started
When you press the Start / Pause button, if the level of water inside the machine is suitable (if add laundry
icon is on), the door lock will be disabled and the door will open so that you can add laundry. When the
door lock is disabled, the door lock symbol on the display will disappear. After adding the laundry, close the
door and press Start/Pause again to continue the washing cycle.
When you press Start/Pause , if the water level in the machine is not sufficient (if add laundry icon
off), the door lock will not be disabled and the door lock symbol will still be shown on the display.
C
If the temperature of the water inside the machine is above 50°C, you cannot disable the door lock even if the water level
is suitable.
Switching the machine to pause mode:
Press the Start/Pause button to switch the machine to pause mode. Start / Pause symbol will flash on the display.
Changing the programme selection after the programme has started:
If Child Lock is not enabled, you can change programme by turning the programme selection knob while the
current programme is running. This will cancel the current programme.
C
The selected programme will start anew.
Changing the auxiliary function, speed and temperature
Depending on the step the current programme has reached, you can cancel or enable auxiliary functions. See
"Auxiliary function selection"
You can also change the speed and temperature settings. See "Spin speed selection" and "Temperature selection".
C
If the temperature of the water inside the machine is high or if the water level is above the door line, the loading door will
not open.

4.3.13 Cancelling the programme

The programme will be cancelled if the programme selection knob is switched to another programme or if the
machine is switched off and on with this button.
C
The programme will not be cancelled if you turn the programme selection knob while child lock is enabled. You should cancel
the Child Lock first.
If you want to open the loading door after you have cancelled the programme but you cannot do it since the water level in the
machine is above the loading door baseline, turn the Programme Selection knob to Pump+Spin programme and discharge
the water in the machine.
Washing Machine / User's Manual
:
is
25 / EN