Scope Of Delivery; Intended Use; Safety Informations - BGS technic 8171 Bedienungsanleitung

Brake Bleeding Bottle for Motorcycles

SCOPE OF DELIVERY

Bottle with cap and magnet
Bleeding hose (4 pcs.)
3-way hose adapter
Bleeding valve adapter (2 pcs.)

INTENDED USE

This bleeding bottle is used for bleeding of hydraulic brake and clutch systems on motorcycles.
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.

SAFETY INFORMATIONS

•
Keep children and unauthorised persons away from the work area.
•
Do not let any children play with the tool or its packaging.
•
Make sure that the work area is sufficiently illuminated.
•
Keep the work area clean, organised, dry and free from other materials.
•
Do not allow untrained persons to work with this bleeding tool.
•
Always wear eye protection. If brake fluid contacts eyes, flush with water immediately and seek
medical attention.
•
Brake fluid is poisonous, do not ingest. If you do ingest brake fluid seek medical attention
immediately.
•
Always use new brake fluid from sealed container when bleeding hydraulic brake system.
•
Do not allow brake fluid to contact vehicle paint. Wash with water immediately if brake fluid is
dropped on paint.
•
Never operate vehicle if you are in doubt of the effectiveness of the braking system. Drive the
vehicle only when brake pedal has a clearly defined pressure point and all components have
no leaks.
•
Brake systems should be maintained by qualified personnel only!
•
Secure your vehicle against unintended movement.
•
Always follow the manufacturer's recommendations.
•
Do not leave brake fluid out in the open. Brake fluid is hygroscopic which means it will absorb
humidity out of the air. The existence of water in brake fluid will decrease its boiling point and
may cause a total malfunction of your brake system.
•
Always use new and unused brake fluid; used and worn out brake fluid may cause a total
malfunction of your brake system.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 8171
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed