Cleaning The Air Filter - Sony VPL-PHZ60 Installationsanleitung

Cleaning the Air Filter

When the message that prompts cleaning the air
filter appears, clean the air filter.
If the dust cannot be removed from the air filter
even after cleaning, replace the air filter with a
new one.
For details on a new air filter, consult with qualified
Sony personnel.
Caution
If you continue to use the projector even after the
message is displayed, dust may accumulate, clogging it.
As a result, the temperature may rise inside the unit,
leading to a possible malfunction or fire.
1
Turn off the projector and disconnect the AC
power cord from a wall outlet.
Note
If you remove the air filter cover while the power is
turned on, you may accidentally touch the fan inside
the unit, which may cause injury.
2
To remove the air filter cover, lift it up while
pressing the two levers.
48
GB
Cleaning the Air Filter
Air filter cover
3
Remove the air filter from the air filter cover.
Pull stick
4
Clean the air filter with a vacuum cleaner.
5
Put the air filter back in the air filter cover, then
attach the air filter cover to the unit.
Notes
 Pull the air filter pull stick upwards when removing the
air filter from the air filter cover. When attaching the air
filter to the air filter cover, make sure the correct side is
being attached so that the pull stick is protruding from
the air filter.
 Securely attach the air filter to the air filter cover, taking
care not to hit the hook of the air filter cover. If the air
filter is attached to the air filter cover incorrectly, a
malfunction may occur.

Press the levers all the way inside the unit to lock it. If the
air filter cover is attached to the unit incorrectly, a
malfunction may occur.