Operation - Rexel Optimum AutoFeed+ 45X Handbuch

Icon Type Models

Operation

1. Unpack the product.
2. Connect the shredder to mains supply.
3. Ensure the ON/OFF button on the back of the machine is in the
ON position, which will illuminate the blue standby symbol
4. To load the shredder, simply lift the loading door handle to
open the loading door and insert documents. You can open the
door further to 90 degrees for easier access if required. Load
up to MAX sheets at a time into the feed chamber. Do not fill
above the MAX level, this could damage the shredder.
5. The shredder will start the shredding cycle automatically ONLY
after closing the loading door.
If there is still paper in the AutoFeed chamber after first
attempt, open and re-close the paper loading door a second
time.
Button / indication & action
Auto-start and stand-by button
(press one time)
Manual reverse button
(hold down)
Manual forward run button
(hold down)
Ready indication
Over heating indication
(Allow to cool)
Overloaded / Jam indication
(Reduce sheet / remove jam)
Bin full indication
(open door (45X lift off head)
and empty the bin)
Door open or shredder head
removed indication (close door
firmly or replace head on bin)
Hopper locked indication
(unlock by entering 4 digit
combination)
Hopper locking security
combination button 1
Hopper locking security
combination button 2
Hopper locking security
combination button 3
Hopper locking security
combination button 4
Attention: If required you can now lock the loading door by
entering a 4 digit code (see Locking the Paper Loading Door
section).
6. If you only have a few sheets to shred, you can use the manual
feed slot, provided the auto feed chamber is empty.
7. I nsert paper to be shredded into the feed area. The shredder
will detect the paper and start automatically.
8. I f the shredder is left in auto mode for more than 2 minutes
without being used, the shredder will automatically turn back
to sleep mode in order to save power.
9. The shredder will automatically 'wake up' from sleep mode
when paper is inserted into the shred mouth or you open the
loading door. There is no need to press the Auto button
Locking the paper loading door
For additional security the paper loading door can be locked
during the shredding of confidential material.
To lock shredder:
1. Place documents in tray. Close paper loading door.
2. Press any 4 digits. REMEMBER YOUR CODE!
Shredder unlocks automatically when:
• 4 digit code is re-entered.
• Shredding is complete.
• Shredder is inactive for 30 minutes (but documents remain in
tray)
Bin full
The shredder will not function when the bin is full and the bin full
symbol is illuminated.
You should empty the bin.
• Pull open the bin slowly to empty.
• Push the empty bin back into place and press the auto button to
resume shredding.
In the 45X the shredder head will be lifted off when the bin is full
and this will stop the shredder. Remove the head, empty the bin
and place the head back on ensuring it is the correct way around
to continue.
The 600 or 750 sheet machines can be used with plastic bags
(2020175B)
Over heating
If the AutoFeed shredder is used continuously without pausing, it
may overheat and the cool down indicator will flash red
allow the shredder to cool down. When the shredder is ready
.
to be used the thermometer symbol will no longer illuminate. If
the shredder needs to cool down while shredding, no action is
needed. The shredder will automatically restart shredding paper
once it has cooled down after periods of continuous use. All you
need to do is ensure paper is loaded into the chamber and the bin
is empty when the machine is cooling down.
.
. Please
5 5 5