Becker Centronic TimeControl TC4410-II Montage- Und Betriebsanleitung Seite 42

Assembly and Operating Instructions
PROGRAMME
SEPARATE (UP/DOWN command -> switching times)
Note
At first, use the channel selector button to select the desired channel
in operating mode.
1. Press the MENU button.
2. To select the PROGAMME menu, press the + button until PROGAMME ap-
pears.
3. Press OK to confirm.
4. Press the + button again until SEPARATE appears.
5. Press OK to confirm.
6. Now set the SWITCHING TIME s and the SWITCHING TIME t for Monday - Friday
(1-5) and Saturday and Sunday (6,7) using the +/- buttons.
Confirm every selection by pressing OK.
7. Press the MENU button to switch to operating mode.
42