LENCO L-400 Bedienungsanleitung Seite 6

SET-UP
6. COUNTERWEIGHT:
Locate and remove the tonearm COUNTERWEIGHT from the packaging. Slide COUNTERWEIGHT onto
the rear of the TONEARM ASSEMBLY. Turn it lightly and it will screw onto the rear shaft of the tonearm.
Turntable Connections:
Before connecting the unit it is advised that you also consult your current equipment instruction manual.
IMPORTANT: Be sure to turn off the equipment before you make changes to the different connections.
1. Connect the power cord to an AC outlet.
2. Connect the RCA cable to the PHONO input of your AMPLIFIER when you set the PHONO/ LINE switch to
PHONO position. You can also use a line input by setting the PHONO/ LINE switch at the rear of the
turntable to LINE.
Output terminals
L (White)
R (Red)
3. Connect PC via USB cord.
6
6
TONEARM ASSEMBLY
Amplifier (Receiver)
L Channel
R Channel
Set the PHONO/LINE
switch to "LINE" .
COUNTERWEIGHT
Set the PHONO/LINE switch
to "PHONO" .