Troubleshooting; Technical Data; Rating Plate - AEG HE604000CB Benutzerinformation

8. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
8.1 What to do if...
Problem
You cannot activate or oper-
ate the hob.
Residual heat indicator does
not come on.
8.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Make sure,
you operated the hob correctly. If not the

9. TECHNICAL DATA

9.1 Rating plate

Model HE604000CB
Typ 60 CAD 02 ZO
Ser.Nr. .................
AEG
9.2 Cooking zones specification
Cooking zone
Left front
Left rear
Right front
Right rear
Possible cause
The fuse is blown.
The zone is not hot because
it operated only for a short
time or the sensor is dam-
aged.
Nominal Power (Max heat set-
ting) [W]
2300
1200
1200
1800
Remedy
Make sure that the fuse is
the cause of the malfunction.
If the fuse is blown again
and again, contact a quali-
fied electrician.
If the zone operated suffi-
ciently long to be hot, speak
to an Authorised Service
Centre.
servicing by a service technician or
dealer will not be free of charge, also
during the warranty period. The
instructions about the Service Centre and
conditions of guarantee are in the
guarantee booklet.
PNC 949 597 471 00
220 - 240 V 50 - 60 Hz
Made in Germany
6.5 kW
Cooking zone diameter [mm]
210
145
145
180
ENGLISH 9