Bluetooth Audio - Kenwood CR-ST80DAB Bedienungsanleitung

station and press <OK> to confirm.
Note: The memory locations cannot be deleted, but can only be overwritten with other stations.
Stored stations are marked in the lower part of the display by an asterisk with the corresponding
memory location number.

7. Bluetooth Audio

The BLUETOOTH function enables the wireless transmission of music files (audio streaming) to the ra-
dio. Smartphones, tablets or similar devices can be paired. To do this, select the source "Bluetooth"
in the main menu.
7.1 Pairing Bluetooth devices for the first time (pairing)
Make sure that the terminal device to be paired is switched on and Bluetooth is activated. Select the
source "Bluetooth" in the main menu. The "Disconnected" appears on the display. Now open the
Bluetooth settings on the terminal device to be paired and start searching for available Bluetooth de-
vices there. Select "KENWOOD CR-ST80DAB" and start the pairing process. After successful pairing,
"Connected" appears on the display. Now the music playback can be controlled via the terminal. To
do this, use the music App of your choice.
Basic operation of play/pause and skip forward/backward is possible using the corresponding buttons
on the remote control.
Note: Some terminal devices require a PIN code when connecting, then enter "0000".
7.2 Automatic connection after pairing has already taken place
If the source switches "Bluetooth Audio" or the radio is switched off, the Bluetooth connection
is disconnected. If the radio is switched on again or switched back to the "Bluetooth" source, an
automatic connection is established.
7.3 Pair another terminal device
To pair another device with the radio, please press the <MENU> key and select "Disconnected". This
will disconnect the current connection. Now proceed as you did when pairing a device for the first
time. A maximum of 8 devices can be saved.
7.4 Interrupting the Bluetooth connection
If you want to interrupt the connection to a paired device, please press the <BT PAIR> button on the
remote control for 2 seconds.. The radio then switches back to pairing mode.
12