What If There Are Problems - Beurer bf 700 Gebrauchsanweisung

13. What if there are problems?

If the scale detects and error when measuring, the following is displayed.
Display
" "
" " runs across the
LCD.
or incorrect weight
is displayed.
or incorrect weight
is displayed.
Incorrect weight is dis-
played.
No Bluetooth connec-
®
tion ( symbol is miss-
ing).
Cause
Unknown measurement as it
is outside the user assignment
limit or a unique assignment is
not possible.
The fat percentage is outside
the measurable range (less
than 3 % or greater than 65 %).
The maximum load-bearing
capacity of 180 kg was excee-
ded.
No flat, stable surface.
Not standing still.
Scale zero setting is incorrect.
Device outside the range.
User memory space is full. No
more measurements can be
saved.
The batteries in the scale are
empty.
Remedy
Assign unknown measurement in app or
repeat user assignment.
Repeat the measurement barefoot or, if
necessary, moisten the soles of your feet
slightly.
The load must not exceed 180 kg
Place the scale on a flat, stable surface.
Stand as still as possible.
Wait until the scale switches itself off. Acti-
vate scale, wait for "0.0 kg" to appear and
repeat measurement.
The minimum range in a free field is approx.
25 m. Walls and ceilings reduce the range.
Other radio waves may interfere with the
transmission. Therefore, do not position the
scale near devices such as WLAN routers,
microwaves, induction hobs etc.
Open the app. The data is transferred auto-
matically. This may take up to one minute.
Replace the batteries of scale.
20