Troubleshooting - Metro PROFESSIONAL GDF3004 Gebrauchsanweisung

For model GDF3008/GDF3028/GDF5008/
GDF5028 equipped with a tap
Small handle
• Wash the lid, frying basket, oil reservoir and
housing with hot soapy water.
• Rinse these parts with clean water and dry
thoroughly.
• Clean the control unit with a damp cloth and mild
soap solution.
• Do not immerse the control units or power cable
with plug in water or other liquids. Never hold
these parts under running water!
• Never use corrosive detergents, wire brushes, or
abrasive scourers, metal or sharp implements to
clean your appliance.
• Dry all parts thoroughly after cleaning and before
use.
• Reassemble the appliance (
Changing the oil
• Oil needs to be changed regularly for hygiene
reasons.
• Never add new oil to used oil. This will lead to
foaming and splattering.
DISPOSAL OF USED OIL AND FAT
• Pour used oil into suitable container (bottle) and
seal it well.
• Wrap solid fat in paper.
• Do not dispose with your normal household
waste. Check with your local authorities regarding
proper disposal methods of used oil.
Installation).
- 18 -
Environmental Protection
Discarded electric appliances are
recyclable and should not be discarded
in the domestic waste! Please actively
support us in conserving resources and
protecting the environment by returning
this appliance to the collection centres.
If the end of the useful life is reached, please make
the device useless by pulling the plug from the wall
outlet and cutting off the cable.

7. Troubleshooting

Problem Cause
The • The power
power plug is not
plug is connected well.
connected • The fuse of the
to an power supply
electrical has been
outlet but triggered.
the power • The control unit
indicator is not installed
does not correctly.
light up • The
and the overheating
appliance protection has
does not been activated.
heat up.
After a • The
while, the overheating
appliance protection has
stops been activated.
working.
For model GDF3004/GDF3024/GDF3008/
GDF3028
• Remove the protection cover of the RESET
button at the bottom of the control unit and push
the RESET button.
RESET
button
GB
Solution
• Unplug the power
plug and re-plug
it properly.
• Check the fuse.
Try to connect
the appliance to
another electrical
outlet.
• Check if the
control unit is
at the correct
position. Reinstall
the control unit.
• Press the RESET
button on the
control unit (see
drawings below).
• Press the RESET
button on the
control unit (see
drawings below).