Auto Av Switching; Auto Sleep; Sleep Timer - Hyundai HLT-1711 Bedienungsanleitung

3
3

Auto AV switching

If your VCR outputs an AV switching voltage when connected to the Euro
scart socket, the set will switch to
you want to keep on watching in TV mode, press the
buttons. Press the INPUT SELECT button to return to AV modes.
Note : If both AV1
taneously, only the AV2 can be received.
4
4

Auto sleep

If you select Auto sleep On
by mode approximately ten minutes after a TV station stops broadcasting.
Repeatedly press the MENU button to select the Special-
menu.
Press the button to select
D D / E E
Press the F F / G G button to select
Repeatedly press the MENU button to return to normal TV viewing.
Downloaded from www.Manualslib.com
AV1 , AV2 mode automatically. But if
D D
, AV2 sockets have been connected to the VCRs simul-
the set will automatically switch itself to stand-
Auto sleep .
On .
Input TV
ChildOlock Off
AutoOsleep Off
Language
()O}{OMENUOEXIT
manuals search engine
5
5

Sleep timer

You don't have to remember to switch the
set off before you go to sleep. The sleep
timer automatically switches the set to
or NUMBER
/ E E
standby after the preset time has elapsed.
Press the SLEEP button to select the num-
ber of minutes. The display
on the screen, followed by
90 , 120 , 180 and
count down from the number of minutes
selected.
Note :
-To view the remaining sleep time, press
the SLEEP button once.
-To cancel the sleep time, repeatedly press
the SLEEP button until the display
appears.
-In the event of power interruption (discon-
nection or power failure), the set releases
the preset sleep time.
0 will appear
r r
10 , 20 , 30 , 60 ,
240 . The timer begins to
0
r r
EN
25