Piazzetta e920 Aufbauanleitung Seite 17

11. Slowly set the plate above the heater. (Fig.10).
12. In case of connection with upper exhaust, continue to connect the pipes to the flue (see "CONNECTION
TO FLUE" section contained in the heater use and maintenance booklet) ( Fig.11).
13. If you have selected the rear exhaust, position the hole cap (5), otherwise it may be thrown away. First lay
some fiberglass strip under the hole cap to avoid chipping it during positioning ( Fig.12).
Downloaded from www.Manualslib.com manuals search engine
17