Labels - Jacobsen RYAN JR Sodcutter Bedienungs- Und Sicherheitshandbuch

Sodcutter
009034910
This decal instructs the operator to read and
understand the Operation & Safety manual. To
prevent injury, they must be familiar with the
operation of this product and be fully aware of safe
operating procedures.
524481
The throttle control decal uses the turtle to represent
slower engine speeds, the rabbit represents faster
engine speeds.
524538
This decal informs the operator that hearing
protection should be worn if operating the
Jr. Sodcutter for extended periods of time (longer
than four hours).
009039290
This decal indicates the unit is certified for use for
the European community.
Downloaded from www.Manualslib.com
Jr.
manuals search engine
524541
The top symbol shows fingers or hands being cut or
severed. DO NOT place hands or fingers under Jr.
Sodcutter while operating the unit.
The middle symbol shows toes or feet being cut or
severed. DO NOT place feet or toes under Jr.
Sodcutter while operating the unit.
The lower symbol informs the operator and/or
bystanders to keep a safe distance away from
machinery. If you do not keep hands and feet a safe
distance from the machinery, personal injury could
occur.
840697
The left symbol shows the possible result of working
on the machinery with safety shields removed.
Hands and fingers may become entangled in belts.
DO NOT operate the unit without safety shields in
place.
The middle symbol warns the operator and/or
bystanders to keep hands out of moving
components.
The right symbol instructs the operator to read the
service section of the operators manual. Disable the
engine (disconnect spark plug wire) before
performing any service or maintenance on the unit.

LABELS

840697
GB-3