Technical Data - Zanussi ZHRN383K Benutzerinformation

Problem
comes on.
8.2 If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre. Give the data
from the rating plate. Give also three digit
letter code for the glass ceramic (it is in the
corner of the glass surface) and an error

9. TECHNICAL DATA

9.1 Cooking zones specification
Cooking zone
Middle front
Middle rear
For optimal cooking results use cookware no
larger than the diameter of the cooking zone.
14 ENGLISH
Possible cause
The second phase of the power sup‐
ply is missing.
Nominal Power (Max heat setting)
[W]
1200
700 / 1700
Remedy
Check if the hob is correctly connected
to the electrical supply. Remove the
fuse, wait one minute, and insert the
fuse again.
message that comes on. Make sure, you
operated the hob correctly. If not the
servicing by a service technician or dealer
will not be free of charge, also during the
warranty period. The instructions about the
Service Centre and conditions of guarantee
are in the guarantee booklet.
Cooking zone diameter [mm]
145
120 / 180