Metabo ASR 25 L SC Originalbetriebsanleitung Seite 26

en ENGLISH
If the volume flow falls below the set value , the
volume flow control display lights up to indicate
that the container must be emptied, or that the
fleece filter bag (6) or the PE filter bag (5) must be
replaced.
Use as a dust extractor (ENT):
The dust extractor must not be connected to more
than one dust source.
Turn switch (1) to the "RA" position.
Adjust the rotary switch (4) to the hose diameter
of the suction hose fitted. For more detailed
information, see section 7.4.
Connect the power tool (deactivated) to the plug
socket (3). See section 7.2.
8.4 Transport
In the case of the ASR 25 L SC / ASR 50 L SC,
leave the hose on the appliance to prevent dust
accidentally escaping.
In the case of ASR 25 M SC, ASR 50 M SC, seal
the suction opening (11) with a sealing plug (12)
and join the hose ends to prevent dust from
escaping.
Wrap the suction hose about the vacuum cleaner.
Place the accessories in a suitable plastic bag
and seal the bag.
Suspend the mains connection lead on the cable
holder (7).
The upper part (8) must be securely sealed to the
container (10) - check that the snap locks (9) are
closed.
9. Cleaning
9.1 General Cleaning Instructions Clean the
container and accessories with water. Wipe the
upper part (8) with a damp cloth.
Caution! This appliance contains dust that is
harmful to health. Discharge and maintenance
operations (including disposal of the dust
collection containers) must only be carried out by
qualified specialists wearing appropriate
protective clothing and equipment.
Emptying the Container Only permitted for
dusts with occupational exposure
limits > 1 mg/m
- Unplug mains cable.
- ASR 25 M SC, ASR 50 M SC: remove suction
hose, seal suction opening (11) with sealing
plug (12).
- Open the snap locks (9). Remove the upper part
(7) from the container (9).
Dispose of the fleece filter bag.
- Unplug mains cable.
- Pull on mask.
26
3
.
- ASR 25 M SC, ASR 50 M SC: remove suction
hose, seal suction opening (11) with sealing plug
(12).
- Open the snap locks (9). Remove the upper part
(8) from the container (10).
- Carefully pull back and remove the fleece filter
bag (6) from the suction opening (11). Seal the
flange of the fleece filter bag by folding over the
cover.
- Dispose of the vacuumed material in
accordance with legal regulations.
Disposing of the PE Filter Bag
- Insert mains plug.
- Switch on the vacuum cleaner and vibrate the
filters: turn the switch (1) to the "RA" position.
- Switch off the vacuum cleaner: turn the switch
(1) to the "0" position.
- Pull on mask.
- ASR 25 M SC, ASR 50 M SC: remove suction
hose, seal suction opening (11) with sealing plug
(12).
- Open the snap locks (9). Remove the upper part
(8) from the container (10). Before setting down
the upper part, turn switch (1) to the "I" position
so that any falling dust is vacuumed.
- Carefully pull back the PE filter bag (5) from the
suction opening (11). Seal the flange of the PE
filter bag by folding over the cover.
- Dispose of the vacuumed material in
accordance with legal regulations.
9.2 Special cleaning instructions for
ASR 25 M SC, ASR 50 M SC
In the case of class M machines, the outside of the
machine should be cleaned (vacuumed and wiped
down), or treated with sealants before being
removed from the hazardous area. All machine
parts must be considered to be contaminated
when removed from the hazardous area: suitable
measures must be taken to prevent any dispersal
of the dust. When carrying out maintenance or
repairs, it is essential to dispose of any
contaminated objects that cannot be adequately
cleaned. These objects must be disposed of using
impermeable bags and in accordance with the
applicable regulations for removing such waste.
10. Maintenance
10.1 General Instructions
Before performing any maintenance,
always switch off the machine and remove
the mains
plug.
Clean the appliance (see section9.).