Operation; Technical Data; Care And Cleaning - Sygonix 2256497 Bedienungsanleitung

Controls
4
5
3
2
1
Item no. 2256497
1 Power LED
3 Quick Charge port (QC/USB-C™)
5 Mains input connector, rotatable by 180°
(on the back/covered)

Operation

• Plug the USB charging adapter with the mains input connector (5) into an earthed mains
socket connected to the public grid. The blue power LED (1) on the bottom front lights up.
• Plug electrical loads with a power of up to 3680 W into the mains socket (4). Do not overload
the socket.
Do not use any extension cables, but plug the product directly into the mains socket!
• If a USB device to be connected has an on/off switch, switch it off before connecting it.
• For the product with item no.: 2256497, connect the USB device to one of the USB con-
nections (2) on the front of the USB charging adapter. You can connect another compatible
USB3.0 device to the second USB connection (2). USB connection (3) is used for quick
charging via a USB3.0 connection.
• For the product with item no.: 2256498, connect up to two USB devices to the USB connec-
tions (2) and one device to the USB C™ connection (3) using a USB-C™ cable.
The power LED (1) on the product with item no.: 2256497 lights up at increased
brightness when USB loads are connected and in operation. On the other hand, the
power LED on the product with item no.: 2256498 does not change its brightness
when USB loads are connected and in operation.
• If a USB device has an on/off switch, switch it on now.
The total current provided to the two normal USB outputs (2) on the front of the USB
charging adapter is 2.4 A. This is automatically distributed if two USB devices are
connected.
• The Quick Charge port (QC/USB-C™) (3) should be used as a charging port on both pro-
ducts.
Do not overload the USB charging adapter, as it can damage the product. The USB
charging adapter detects the charging current required by a mobile phone, smart-
phone or tablet via its integrated electronics.
However, due to great variety of devices it cannot be guaranteed that all devices can
be charged with maximum possible charging current (as is the case with an original
charger matching the device).
• If the USB device is no longer needed, disconnect it from the USB charging adapter.
• If there are no USB devices connected to the USB charging adapter, unplug it from the
mains socket to save energy.

Care and cleaning

• Place the sticker in your preferred language on the device at a suitable location if that is
necessary.
• This product does not require any maintenance. Never attempt to dismantle it.
• Before cleaning, disconnect the product from the mains voltage and unplug the mains plug
from the mains socket. If a USB device is connected, disconnect it from the USB charging
adapter as well.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these
may damage the enclosure or cause the product to malfunction.
• Use a dry, lint-free cloth to clean the product.
4
5
3
2
1
Item no. 2256498
2 USB connections (USB3.0)
4 Power socket
Disposal
Electronic devices are recyclable waste and must not be placed in household waste.
At the end of its service life, dispose of the product in accordance with applicable
regulatory guidelines.
You thus fulfil your statutory obligations and contribute to environmental protection.

Technical data

a) Item no.: 2256497
Nominal input voltage/current ....... 100 - 240 V/AC, 50/60 Hz, 0.8 A (for USB)
Output voltage/current .................. 230 V/AC, 50/60 Hz, 16 A (for socket max. 3680 W)
Socket ........................................... 1x alternating voltage
Enhanced protection
against accidental contact ............ Yes
USB connection ............................ 2 x USB output (smart IC)
Single output: 5 V/DC, 2.4 A, max. 12 W
Both outputs, 5 V/DC, 2.4 A, max. 2 x 6 W
Quick Charge output ..................... 1 X USB3.0
3.6 - 6.5 V/DC, 3 A,
6.5 - 9 V/DC, 2 A;
9 - 12 V/DC, 1.5 A (max. 18 W)
Operating conditions ..................... 0 to +40 °C, max. 95 %
relative humidity (non-condensing)
Storage conditions ........................ -25 to +70 °C, max. 95 %
relative humidity (non-condensing)
Dimensions (W x H x D) .............. 54 x 125 x 75 mm
Weight .......................................... 160 g
b) Item no.: 2256498
Nominal input voltage/current ....... 100 - 240 V/AC, 50/60 Hz, 0.8 A (for USB)
Output voltage/current .................. 230 V/AC, 50/60 Hz, 16 A (for socket max. 3680 W)
Socket ........................................... 1x alternating voltage
Enhanced protection
against accidental contact ............ Yes
USB connection ............................ 2 x USB output (smart IC)
Single output: 5 V/DC, 2.4 A, max. 12 W
Both outputs, 5 V/DC, 2.4 A, max. 2 x 6 W
Quick Charge output ..................... 1 X USB type C™
5 V/DC, 3 A;
9 V/DC, 2 A;
12 V/DC, 1.5 A (max. 18 W)
Operating conditions ..................... 0 to +40 °C, max. 95 %
relative humidity (non-condensing)
Storage conditions ........................ -25 to +70 °C, max. 95 %
relative humidity (non-condensing)
Dimensions (W x H x D) .............. 54 x 125 x 75 mm
Weight .......................................... 158 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or capture in electronic
data processing systems, requires the prior written approval of the publisher. Reprinting, also in part, is prohibited. This
publication reflects the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE. *2256497_98_v5_1120_02_DS_m_4L_(1)