ResMed AirFit P10 Handbuch Seite 13

Cleaning the vent module
1. Clean and check the vent module daily.
2. Wash in warm water using a mild liquid detergent.
3. Clean with a soft bristle brush paying particular attention to the vent
holes
4. Rinse well under running water. Shake to remove excess water and
allow to air dry out of direct sunlight.
5. Check that there is no dirt or dust in the vent holes.
Note: Do not wash in a dishwasher or washing machine.
Cleaning the mask pillows, frame and the mask tube
Daily:
1. Clean the mask pillows, frame and mask tube daily. Gently rub in
warm (approximately 86°F or 30°C) water using mild liquid detergent
until visually clean.
2. Rinse well under running water and allow to air dry out of direct
sunlight.
In addition to daily cleaning, each week:
1. Clean the mask frame and the end of the mask tube with mild liquid
detergent using a soft bristle brush. Pay particular attention to the
crevices and cavities.
2. Rinse well under running water and allow to air dry out of direct
sunlight.
English 7