Warranty - Dometic PR2000 Montageanleitung

Warranty

Programming the remote control and the wall switch
1. Place the battery (see fig. 0 1, page 9).
2. Switch on the power supply.
✔ The receiver beeps once briefly.
3. Press the programming button (fig. 0 2, page 9) or the buttons
the wall switch simultaneously (fig. a 1 and 2, page 9) within 4 seconds.
✔ The receiver beeps once briefly.
4. Press the programming button (fig. 0 2, page 9) or the buttons
the wall switch simultaneously (fig. a 1 and 2, page 9) again briefly.
✔ The receiver beeps once briefly.
5. Briefly press the button
✔ The receiver beeps four times briefly.
✔ The awning moves briefly.
Proceed as follows to pair the wall switch:
1. Press the programming button (fig. 0 2, page 9) twice.
✔ The receiver beeps twice briefly.
2. Press the buttons
page 9).
✔ The receiver beeps five times briefly.
✔ The remote control or wall switch and awning are now set to one another.
8 Warranty
The statutory warranty period applies. If the product is defective, please contact your
retailer or the manufacturer's branch in your country (see dometic.com/dealer).
For repair and warranty processing, please include the following documents when
you send in the product:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
20
(fig. a 3, page 9).
on the wall switch simultaneously (fig. a 1 and 2,
and
PR2000, PR2500
and on
and on
EN