Options; Before First Use - Zanussi ZDF4014WA Benutzerinformation

Programme Degree of soil
1) Type of load
Fresh soil
4)
Crockery and cut-
lery
5) All
1) The pressure and the temperature of the water , the variations of the mains supply, the options and the
quantity of dishes can change the values.
2) With this programme you have the most efficient use of water and energy consumption for crockery and
cutlery with normal soil. (This is the standard programme for test institutes).
3) The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts
the temperature and quantity of the water, the energy consumption and the programme duration.
4) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
5) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes
and bad odours to come out from the appliance.
Do not use detergent with this programme.
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.

Options

Multitab
Activate this option only when you use the
combi detergent tablets.
This option deactivates the flow of rinse aid
and salt. The related indicators are off.
The programme duration can increase.
1. Press the on/off button to activate the ap-
pliance.
2. Make sure that the appliance is in setting
mode, refer to 'Setting and starting a pro-
gramme'.
3.
Press and hold at the same time
until the multitab indicator comes on.
If you stop to use the combi detergent
tablets, before you start to use

Before first use

1. Make sure that the set level of the water
softener agrees with the water hardness in
your area. If not, adjust the water softener.
www.zanussi.com
Programme
phases
Wash 60 °C
Rinse
Prewash
separately detergent, rinse aid and
dishwasher salt, do these steps:
1. Set the water softener to the highest level.
2. Make sure that the salt container and the
rinse aid dispenser are full.
3. Start the shortest programme with a rins-
ing phase, without detergent and without
dishes.
4. Adjust the water softener to the water
hardness in your area.
5. Adjust the released quantity of rinse aid.
and
Contact your local water authority to know
the water hardness in your area.
2. Fill the salt container.
Duration Energy
(min)
30 0.8
14 0.1
This option is not applicable to
Water
(kWh) (l)
9
4
.
43