Setting The Time Format - TechniSat DIGITRADIO 52 Bedienungsanleitung

> After each additional setting, press the SELECT/MENU button to move on to the
next setting.
> To set the date, proceed in the same way as described above.
> After all settings have been done and the SELECT/ MENU button pressed for the
last time, [Saved] appears on the display.
10.1.2 Time update
In this submenu, you can specify whether the time update should be done
automatically via DAB+ or FM, or whether you wish to enter it manually (Section 10.1.1).
> Hold the SELECT/MENU button down briefly. Use the < or > buttons to select [Set
Time/Date] and press the SELECT/MENUbutton.
> Use the < or > buttons to select [Auto. Update] and press SELECT/MENU.
> Use the < / > buttons to select the following options:
[DAB and FM] (update via DAB+ and FM)
[DAB] (update only via DAB+)
[FM] (update only via FM)
[No Update] (Time/Date must be entered manually, see Section 10.1.1).
> Press the SELECT/MENU button to accept the setting.
112

10.1.3 Setting the time format

In the Set 12/24 hrs. submenu you can activate the 12- or 24-hour format.
> Hold the SELECT/MENU button down briefly. Use the < or > buttons to select [Set
Time/Date] and press the SELECT/MENUbutton.
> Use the < or > buttons to select [Set 12/24 hrs.] and press SELECT/MENU.
> Use the < or > buttons to select one of the following options:
[24] (for 24 hour format)
[12] (for 12 hour format)
> Press the SELECT/MENU button to save.
DE
EN
FR
NL
113