Online Mode - LD Systems ZONE X 1208 Bedienungsanleitung

8. If you have changed the settings offline, save your project in the desired location by clicking on File > Save As. If you have changed an existing
project file, save this using File > Save. You get the same effect by clicking on the "Save" symbol in the top right of the work area.
It is a good idea to save backups of project files externally.
The file extension (naming extension) for saved project files is .pjxml.

ONLINE MODE

If you select online mode, the design file is loaded on the connected device(s) and you can make changes in real time.
In this case, all devices must be connected and online (green "ON" indicator in network view).
To switch to online mode, the device module must be assigned to the physical hardware.
1. Select the device module you want to assign from the project view.
2. Right-click on the device module and select Map to Physical Device.
3. The recognised devices are now listed with their Mac addresses. If several identical devices are connected to the network, they can be identidied
by their Mac addresses. Network view shows the Mac addresses for the individual devices.
It is very important that the name of the device block in the design file precisely matches the unit in the network view, otherwise the design
cannot be loaded on the corresponding hardware.
18