Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Quick Install Guide
RECOMMENDATION: Please read this manual thoroughly before installation.
AC Power Cable
Ethernet Cable
Copyright 2010 IOCELL Networks Corporation,
IOCELL Networks, NDAS®and NetDISK® are trademarks or registered trademarksof IOCELL Networks
Corporation or one of its affiliates.
All other trademarks or registered trademarks are the property of their respective owners.
IOCELL Networks reserves the right to change, without notice, product offerings or specifications.
HDD Installation
fig 2.a
Turn the NetDISK 352UN
Press down on the tab with
upside down
a key or similar object and
remove the cover.
Software Installation (352UN)
Windows 7/Vista/XP/Server 2003/2000
Insert the included NetDISK Installation CD to your CD-ROM Drive. Follow the easy
and simple instructions through the installation.
1
2
Insert "NetDISK®
Welcome Screen
fig 3.a
installation CD"
appears
Installation Notes:
1) If your computer is not equipped with a CD/DVD-ROM, simply visit www.iocellnetworks.com to download the latest
NDAS connection software for your OS.
2) The USB connection does not require any special software to operate.
3) If using the NDAS RAID setup on the 352UN, read the full user manual carefully to understand the limitations when
accessing by USB.
MAC Users
Open the CD and browse to the MAC folder to find Network connection software. Open the README file for basic
installation and short troubleshooting instructions. Consult the full User Manual for more complete help.
Model: 352UN
USB Cable
Install & Manual CD
fig 2.b
fig 2.c
Insert the hard drive and
Replace the cover and
push it gently until is all
press until the tab locks
the way in past the front
in place.
of the case.
3
4
Select your Language
Choose Installation
fig 3.b
fig 3.c
for the appropriate
product
Precautions
! User Precautions
Please read this installation guide carefully before using this product. Improper configuration, setup or operation, the presence of
static electricity, defective components, magnetic fields, etc. may cause the loss of data. Please carefully inspect all components
and all areas of operation prior to assembling, installing or storing data on the product. The manufacturer will not be responsible
for lost data. To prevent the loss of your important data, please back up all sources regularly.
! Safety Precautions
Do not attempt to modify or service the product, serious damage may occur.
Take extra care when installing the hard disk drive(s).
Damaged components may cause electronic shock or fire. Please carefully inspect all power cords and electrical connections
before using. Do not touch any electronic components if your hands are wet.
Do not move the product while operating, it may cause damage to the hard disk(s) or other parts. If you must move the product,
please turn off the power and wait until the hard disk(s) spin down completely.
Please allow the internal hard disk(s) to cool completely before handling.
Do not drop or shock the product, this may cause fatal damage to the product and/or the hard disk(s).
Do not use the product in dusty or moisture prone conditions.
Operating in areas subject to rain or other wet circumstances will damage your device.
Do not operate the product in a hot place or leave it in direct sunlight, it may cause damage.
Keep the product out of the reach of children.
! Installation and Assembly Precautions
Prepare a clear workspace for assembly and a clear space where the product will operate.
Install hard disk(s) only when the power cord is disconnected.
Do not apply too much pressure or force to any parts during installation, product damage or personal injury may occur.
Handle the hard disk drive carefully to avoid shock by force or static electricity (operator ground wire suggested).
Hardware Installation
NDAS
Mode
®
Connect NetDISK® to your router
with included Ethernet cable.
For wireless users - Connect NetDISK® to your
wireless router or switch with the included
Ethernet cable.
Make sure the power cord is connected
firmly and press the ON/OFF switch to the
ON position.
Software Installation (352UN) - continued
When software installation is complete, you will find the NDAS Device Management tool icon on the system tray in the
bottom right corner of your Desktop.
5
Register the NetDISK
• Click the NDAS Device Management tool located in
the task bar on the bottom right corner of your screen
• Choose "Register a New Device.
6
Follow The Screen Instructions
• NetDISK® ID and Write Key can be found underneath the NetDISK® case.
• The NetDISK® ID and Write Key do not contain the letter "O"or the letter "I".
• Please use numeric "1" or "0" for all occurrences of these characters.
7
Click Finish
fig 2.d
8
Repeat installation process 1-7 on
all systems on your network that you
would like to have share this drive.
Found New Hardware Wizard
• This window may or may not appear.
• If the window appears, follow the instructions and install the new NetDISK®.
Windows XP
Windows Vista
Click "No, not this time. "
Check "Always trust software from Ximeta, Inc. "
Found New Hardware Wizard
• Click "NetDISK® Administrator Tool" to see the registered NetDISK®
fig 3.d
Read/Write Mode
Windows® 98 / MAC OS X
• For the latest software and drivers, visit "www.iocellnetworks.com"
English
USB Mode
fig 1.a
Connect NetDISK® directly to your computer's
USB port using the included USB cable.
Note: Try directly connecting the NetDISK to a
gigabit Ethernet port for the fastest transfer speeds.
Read Only Mode
fig 1.b
Werbung
