How To Use; Switching On; Dvd Set-Up Menu; Language Setting - Clatronic DVD 619 HC Bedienungsanleitung

Switching On

The requirement here is that the DVD Player has been
connected with the TV and the additional components of
your Audio unit as previously described. In addition, the
devices have to be switched on and the TV has to be set
to AV mode.
1. Press the Power to the front of the DVD Player. The
standby light is on.
2. Then press the Power button on the remote control
or press the Play button or the Function on the device
itself to switch on the unit.
3. Set the desired source using the Function button
(DVD/FM/AUX).
DVD Set Up Menu
When starting your device for the fi rst time you should
familiarise yourself with the various settings. We wish to
point out that the basic settings have already been made
by the manufacturer, such as English language version for
the sound, etc.

Language setting

1. Press the FUNCTION button until DVD appears on the
display.
2. Press the STOP button so that no disc is playing.
3. Press the SETUP button. The menu appears on the
screen.
4. Use or cursor button to select the Language, then
press the ENTER button.
5. Once these settings have been made press the Return
button to return to the normal screen.
Video setting
Screen format setting
1. Press the SETUP button.
2. Use or cursor button to select Video, then press the
ENTER button.
3. Use or cursor button to select TV Shape, then press
the ENTER button.
4. Use or cursor button to shift and select the TV type,
then press the ENTER button.
5. To exit the FUNCTION SETUP MENU and return to the
normal screen, press the RETURN button.
102
5....-05-DVD 619_GB 102
Downloaded from www.Manualslib.com

HOW TO USE

manuals search engine
4 : 3 Pan Scan
This picture format changes a
wide screen recording to ensure
that the centre part is always
viewed on a 4:3 scale.
4 : 3 Letter Box
When wide-screen video mate-
rial is played in this mode on a
conventional TV screen, black
bands appear at the top and
bottom of the screen.
16 : 9 Wide Screen
This is the correct mode for
playing wide-screen videos on a
wide-screen TV.•You must also
set the screen mode on your
wide-screen TV to „FULL".
Notes:
Again, it is the manufacturer of the DVD which determines
the available picture formats. Therefore, when buying a
DVD, check the available picture formats. The availability
of the picture formats also depends on your TV. If you
select 16:9 wide screen mode and you own a 4:3 TV the
DVD playback picture will be distorted on the screen.
Ensure at all times whether the chosen picture format
corresponds with your TV.

Video Output

1. Press the SETUP button.
2. Use or cursor button to select Video, then press the
ENTER button.
3. Use or cursor button to select Video Output, then
press the ENTER button.
4. Enter CVBS and confi rm your choice with Enter.
5. To exit the FUNCTION SETUP MENU and return to the
normal screen, press the RETURN button.
Always set Video Output in CVBS, otherwise the picture
on the TV may be distorted. If this occurs and you can not
see the picture, proceed as follows:
1. Change into DVD mode.
2. Open the DVD tray.
3. Press the Set Up button, then
Enter & Return
, Enter, , Enter, ,
24.05.2004, 14:41:32 Uhr