Pairing Sensors - Securifi Almond 2015 Kurzanleitung

1) Plug the AC adapter of the Almond into the power
outlet.
2) Follow the on-screen instructions on the Almond's
Touch Screen.
This typically involves the following steps:
1) On the Almond LCD, inside the "Add sensor" section tap "Add. "
2) Set the sensor/device in pairing mode as per instructions.
Controlling Sensors and Almond
Almond and the connected sensors can be controlled through a variety of
interfaces:
1) Almond iOS App
2) Almond Android App
3) Remote Web Interface: https://connect.securifi.com
4) Local Browser Interface: http://10.10.10.254 (default)
5) LCD UI
Ideal location is 50-100 feet from the
main router depending on the
number of walls. Please also make
sure it is not so far from the main
router that it can't maintain a stable
connection with the main router.
Downloaded from www.Manualslib.com
Range Extender

Pairing Sensors

Range Extender Location
manuals search engine
6