Fronius Symo 3.0-3-S Serviceanleitung Seite 100

100
(4) (4)
(3)
(2) (1)
Thread in the wire and position the
1
new SymoFIL
Mount the SymoFIL with nine 4x9
2
TX20 screws (4)
[2 Nm]
Insert the ground connection (5) and
3
ensure it is correctly positioned
(4) (5)
Insert the PC board holder (3)
4
(3)
The PC board holder must snap com-
5
pletely into place in the Datcom area
(3)
Mount all cable and plug connections
6
(2)
(1-2) on the SymoFIL
Insert the Recerbo, close the inverter
7
and insert into the wall bracket (see
"Replacing the Display PC Board
(Recerbo)" and "Opening and Closing
Device" sections)
After switching on the inverter, carry out a
fan test via the display (see Operating
Instructions)