Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• FLICKERLESS: OFF / ON
I f set to ON, the shutter speed will be fixed to /00 (PAL:/0) second. This will prevent possible screen
distortion due to a mismatch between the vertical sync frequency and the blinking frequency of the lighting.
NOTE: • If the IRIS menu is set to ELC, the FLICKERLESS menu will be deactivated.
• If the SHUTTER menu is set to AUTO or FIX mode, the FLICKERLESS menu will be deactivated.
• If the SENS-UP menu is set to FIX mode, the FLICKERLESS menu will be deactivated.
• If the AGC menu is set to FIX mode, the FLICKERLESS menu will be disabled.
• DIS: OFF / ON
Digital Image STabilization will set the anti-shake compansation.
NOTE: • If you set DIS to ON, the compensation area will be enlarged as set in the digital zoom factor.
• If you set the digital zoom factor to greater than the enlarged zoom factor for the compensation,
the DIS function will be deactivated.
• DAY& NIGHT: DAY / NIGHT / AUTO / EXT
• DAY: If set to DAY, it will be fixed to DAY mode regardless of the ambient conditions.
• N IGHT: If set to NIGHT, it will be fixed to Black-and-White mode regardless of the ambient conditions.
If you press the SETUP key with a NIGHT submenu selected, you will see a menu where you can set BURST to
OFF/ON. If BURST is set to ON, the Burst signal will output together with the Black-and-White composite video
signal. If BURST is set to OFF, the Burst signal does not output.
• A UTO: The camera will automatically switch between DAY and NIGHT mode, according to the lighting condition.
I f you press the SETUP key on AUTO, you will see the BURST, DAY –> NIGHT, NIGHT –> DAY, MASK AREA
options on your screen.
Y ou can set the BURST option to OFF/ON, or select to output the Burst signal in NIGHT mode.
In the DAY –> NIGHT option, you can selelct from LOW to HIGH for the brightness of DAY –> NIGHT, which is a
brightness level in switching from the colour filter to Black & White. Closing to LOW from HIGH will switch the
filter in a low contrast scene. The DWELL TIME of DAY –> NIGHT is a time required to determine the need for
switching the filter.
In the NIGHT –> DAY option, you can select from LOW to HIGH for the brightness of NIGHT –> DAY, which is a
brightness level in switching from the Black & White filter to colour, Closing to LOW from HIGH will switch the
filter in a low contrast scene. The DWELL TIME of NIGHT –> DAY is a time required to determine the need for
switching the filter.
In the MASK AREA option, you can specify MASK and simultaneously. This function is used to prevent a
filter switch error or inability of determining the switch in existence of a high spot light source at night.
NOTE: If BACKLIGHT is set to BLC, the MASK AREA function will be deactivated.
• EXT: This enables an auto switching between DAY and NIGHT mode using the detected brightness level by
photocell.
CAUTION !
This acmera has the inner photocell.
Therefore we recommend the „DAY&NIGHT" menu setting as „EXT" to get the best results.
• WHITE BAL: DAY / NIGHT
If you want to adjust the colour scheme, use the WHITE BALANCE function.
• D AY: In this mode, you can set the colour values of RED and BLUE. The screen will be displayed in colours
according to your settings.
NOTE: You can set the values of R-GAIN and B-GAIN only in AWC mode.
3
Werbung
Inhaltsverzeichnis
