Samsung HT-F6500 Bedienungsanleitung Seite 23

Lets you set the product to output
video from the HDMI OUT jack with
HDMI Deep
Deep Colour. Deep Colour provides
Colour
more accurate colour reproduction
with greater colour depth.
Progressive Lets you improve picture quality
Mode when viewing DVDs.
Audio
Lets you configure the settings of
the speakers you have connected
to obtain the best possible surround
sound.
 Normal Mode: Select if you
have set up your speakers in the
recommended speaker layout with
the surround speakers next to or
Simple behind the listening positions.
Speaker
 Simple Mode: Select if you have
Setup
put your surround speakers in front
of the listening position. Downmixes
the front sound to the surround
sound speakers.
| NOTES |
\
DPLII, SFE, Virtual 7.1 will not
operate when the simple mode is
on.
Lets you adjust the following
speaker settings and turn the test
tone on and off so you can test the
speakers.
 Level: Lets you adjust the relative
loudness of each speaker from 6db
to -6db. For example, if you like
deep bass, you can increase the
loudness of the subwoofer by 6db.
Speaker
 Distance: Lets you adjust the
Settings
relative distance of each speaker
from the listening position up to 9
meters. The farther the distance,
the louder the speaker will be.
 Test Tone: Lets you run the Test
Tone function so you can test your
adjustments. Setting Test Tone to
On turns the Test Tone on. Setting it
to Off turns it off.
Lets you configure the Equaliser
Equaliser
settings manually.
Lets you set the product so that
the volume remains stable when a
Smart Volume
scene change occurs or when you
change the channel.
Lets you select which speakers you
Speaker
want active, either the TV's speakers
Selection
or the home cinema's speakers.
Lets you direct the sound from the
TV to the Home Cinema speakers.
Requires a HDMI connection and
an Audio Return Channel (ARC)
compatible TV.
• If Audio Return Channel is set to
on and you are using an HDMI
Audio Return
Cable to connect the product to
Channel
the TV, digital optical input will not
work.
• If Audio Return Channel is set to
auto and you are using an HDMI
Cable to connect the product to
the TV, ARC or digital optical input
is selected automatically.
Lets you set the Digital Output to
match the capabilities of the AV
receiver you've connected to the
Digital Output
product. For more details, please
refer to the digital output selection
table. (See page 56)
Lets you apply dynamic range
control to Dolby Digital, Dolby Digital
Plus, and Dolby TrueHD audio.
 Auto: Automatically controls the
dynamic range of Dolby TrueHD
audio, based on information in the
Dolby TrueHD soundtrack. Also
Dynamic
turns dynamic range control off for
Range
Dolby Digital and Dolby Digital Plus.
Control
 Off: Leaves the dynamic range
uncompressed, letting you hear the
original sound.
 On: Turns dynamic range control on
for all three Dolby formats. Quieter
sounds are made louder and the
volume of loud sounds is reduced.
Lets you select the multi-channel
downmix method that is compatible
Downmixing with your stereo system. You
Mode can choose to have the product
downmix to normal stereo or in
surround compatible stereo.
23
|
English