Panasonic WH-SDC07C3E5 Bedienungsanleitung Seite 8

WEEKLY TIMER SETTING
Timer Display
Lights up if Timer
operation is selected
TIMER
1
MONTUEWEDTHU FRI SAT SUN
ON
OFF
ON Timer
To automatically switch "ON" the unit
Day to be selected
Function
Enter timer mode
Set day & time
Add/Modify timer
Disable timer
Enable timer
Check timer
Cancel timer
Notes:
• You can set the Timer for each day of the week (Monday to Sunday) with 6 programs per day.
• When the unit is switched on by the ON TIMER, it will use the previously set temperature to control the water outlet
temperature.
• Same timer program cannot be set in the same day.
• You may also select collective days with same timer setting.
• Promotes energy saving by allowing you to set up to 6 programs in any given day.
8
6 different programs can be set in a day (1 ~ 6)
2 3 4 5 6
Indicates the selected day
Indicates the next timer operation day
Time to be selected (10 minutes step)
OFF Timer
To automatically switch "OFF" the unit
Step
TIMER
Press .
1. Press or to select your desired day.
SELECT
2. Press to confi rm
3. "1" will be blinking, press
OFF/ON
4. Press to select ON or OFF timer.
5. Press or to select your desired time.
If you want to set the timer together with other operations, press
SET
6. Press to confi rm program 1. The selected day will be highlighted with ▼.
• After 2 seconds, the display will move to the next program.
7. Repeat steps 4 to 7 to set programs 2 to 6.
• During timer setup, if no button is pressed within 30 seconds, or if the
setting at that moment is confi rmed and timer setup is ended.
Repeat the steps above.
CANCEL
TIMER
Press , then press
SET
TIMER
Press , then press
TIMER
1. Press .
2. Press or until your desired day is shown, press
3. Press or to check the set programs.
TIMER
1. Press .
2. Press or until your desired day is shown.
SELECT
3. Press to enter program setting.
4. Press or until your desired program is shown.
CANCEL
5. Press to cancel the program.
SELECT
to set program 1.
.
.
SETTING
SET
TIMER
SELECT
OFF/ON
CANCEL
CLOCK
QUIET
MODE
and .
SET
button is pressed the
SELECT
to confi rm your selection.