Storing Channels Automatically - Samsung LE23R3 Bedienungsanleitung

Storing Channels Automatically

You can scan for the frequency ranges available to you (and availability depends on your country).
Automatically allocated programme numbers may not correspond to actual or desired programme
numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.
1. Press the MENU button to display the menu.
Press the or
2. Press the ENTER button to select "Country".
3. Select the appropriate country by pressing the
Press the ENTER button to confirm your choice.
4. Press the or
5. Press the ENTER button.
The TV will begin memorizing all of the available channels.
ENTER
Press the
6. After all the available channels are stored, the "Sort" menu appears.
4. Select the appropriate country by pressing the
Press the ENTER button to confirm your choice.
5. The "Auto Store" menu is displayed with the "Start" selected.
Press the ENTER button.
The channel search will start and end automatically.
After all the available channels are stored, the "Clock Set" menu appears.
Press the
6. Press the ENTER button.
Select the "Hour" or "Minute" by pressing the
Set the "Hour" or "Minute" by pressing the
You can also set the hour and minute by pressing the number buttons on the
remote control.
7. Press the ENTER button to confirm your setting.
Language: Select your language.
Country: Select your country.
Auto Store: Automatically scans for and stores channels available in the local area.
Clock Set: Sets the current time for the TV clock.
If you want to reset this feature...
1. Press the MENU button to display the menu.
Press the
2. Press the ENTER button again, to select "Plug & Play".
3. This will change or reset the settings.
- Storing Channels Automatically
- Storing Channels Manually (Refer to page 8)
- Editing the Channels (Refer to page 8)
button to select "Channel", then press the ENTER button.
button to select "Auto Store", then press the ENTER button.
button at any time to interrupt the memorization process and return to the "Channel" menu.
Channels can be stored automatically by simply pressing the AUTO PROG. button on
the remote control.
ENTER
button at any time to interrupt the memorization process.
or button to select "Setup", then press the ENTER button.
or button.
English-7
or button.
or
button.
or
button.