Using The Lang (Language) On-Screen Display; Resetting The Adjustments; Resetting An Adjustment Item - Sony Trinitron GDM-200PST Bedienungsanleitung

Using the LANG (Language) On-
screen Display
English, French, German, Spanish, Italian and Japanese
versions of the OSDs are available.
1
Press the MENU button.
The MENU OSD appears.
MENU
2
Press the ¨./> and >?// buttons to select "
LANG," and press the MENU button again.
The LANGUAGE OSD appears.
3
Press the ¨./> buttons to select the desired
language.
ENGLISH: English, FRANÇAIS: French,
DEUTSCH: German, ESPAÑOL: Spanish,
ITALIANO: Italian, or
The OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button again.
To reset to English, press the RESET button while the OSD
is on.
LANGUAGE
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
I TA LIANO
: Japanese.
Customizing Your Monitor

Resetting the Adjustments

Resetting an adjustment item

1
Press the MENU, ¨./> and >?//buttons to select
the OSD containing the item you want to reset.
MENU
2
Press the ¨./> buttons to select the item you want
to reset.
3
Press the RESET button.
RESET
Resetting all of the adjustment data for
the current input signal
When there is no OSD displayed, press the RESET
button.
All of the adjustments data for the current input signal is
reset to the factory settings.
Note that adjustment data not affected by changes in input
signal (OSD language, OSD position, input signal selection,
power saving delay time and the control lock function) is
not reset to the factory settings.
RESET
Resetting all of the adjustment data for all
input signals
Press and hold the RESET button for more than two
seconds.
All of the adjustment data, including the brightness and
contrast, is reset to the factory settings.
RESET
EN
F
D
ES
I
17