Stopping Playback - Grundig CMS 3000 BT DAB+ Benutzerhandbuch

EXTERNAL DATA MEDIA MODE
Charging a USB Device
Your Micro HiFi System include a USB port at
the back. This allow you to charge a USB De-
vice using the Micro HiFi System.
1 Connect your USB using the USB cable into
the »5V 1A« socket.
– The USB Device will begin to charge.
Notes:
The Micro HiFi System switches off automati-
7
cally after approx. 15 minutes.
Power output of the USB port is 1A. If your
7
device require more power may not charge
through this USB port.
Charging function may not be support for all
7
smartphones, tablets or electronic devices.
Caution:
To ensure the device is splashproof, close
7
the rubber cover of the sockets tightly.
Selecting the input source
1 Select the input source (»CD« or »USB«) by
pressing »CD« or »USB«.
– Playback starts automatically.
Note:
If no data medium is inserted/connected,
7
the message »NO DISC« or »NO USB« ap-
pears.
Inserting/connecting music data
media
Inserting the disc
1
Press » « to open the CD compartment.
.
– The CD compartment opens.
2 Put in the disc with its label facing upwards.
3 Press » « to close the CD compartment.
.
– The disc is read.
– Display in MP3/WMA mode: the total num-
ber of albums and tracks.
– Display in CD-DA mode: the total number of
tracks and the total playing time.
4
Playback starts automatically.
30
ENGLISH
-------------------------------------------------------
Connecting an MP3 player or a USB
memory stick
1
Switch the device to standby mode by pressing
» 8 «.
2
Connect the USB interface of the MP3 player
to the » « socket of the hi-fi system with a
standard USB cable;
or
insert the USB plug of the USB memory stick
into the USB interface »
tem.
3 Switch on the device from standby by pressing
» 8 «.
– Display: the total number of albums and
tracks.
Playback
Pausing and resuming playback
1 Press » e II« to pause playback.
– Display: the playing time flashes.
2
Resume playback with »
– Display: number of folders and tracks or
track information and the elapsed playing
time.
Resuming playback
1
Pause playback by selecting another input
source or press » 8 «.
– If you select the data medium again, play-
back continues from the point at which it
stopped.

Stopping playback

1 To stop playback, press »
– When playback starts again, it begins from
the first track.
Repeating the current track
1 Press »REP« briefly during playback.
Selecting another track or folder
When you play music CDs, you can select the
track; when you play MP3/WMA files, you can
also select folders.
« of the hi-fi sys-
II«.
e
«.
7