Connecting; Disconnecting; Cleaning, Care And Maintenance; Service - AEG Automotive 10698 Bedienungsanleitung

uSE
Information about use
Do not cover the device during use and
ensure proper ventilation.
Connecting the device
Plug the 230 V mains plug (2) into a
mains socket. always disconnect the
230 V mains plug (2) from the power
source when the voltage converter is
not in use.
Connecting external devices
1. Insert the plug of the external de-
vice into the 12 V socket (3) on the
voltage converter.
2. Now switch on the (external)
devices connected to the voltage
converter.
CLEANING,
CARE AND
MAINTENANCE
Minimal care will ensure your device
remains functional for years.
•
Carefully wind the cable when storing
the device. This will help prevent
accidental damage to the cable and
the device.
•
Clean the product with a soft, dry
cloth.
•
Store the machine in a clean, dry
place.

Service

Should you have any questions regard-
ing commissioning or operating in spite
of studying these operating instruc-
tions, or if a problem should occur
against all expectations, please get in
contact with your specialist supplier.

Disposal

The packaging consists of non-contam-
inating materials that you can dispose
of at your local recycling point.
English 17