Changing The Password; Resetting The Password Function; Disabling The Password Function; If You Forget The Password - Pioneer KURO PDP-LX6090 Bedienungsanleitung

Useful adjustment settings

Changing the password

Use the following procedure to change the password.
1 Press HOME MENU.
2 Select "Setup" (/ then ENTER).
3 Select "Password" (/ then ENTER).
The password entry screen appears. Enter the current four-digit
password using buttons 0 to 9.
4 Select "Change Password" (/ then ENTER).
5 Enter a four-digit password to be newly set, using buttons 0
to 9.
Change Password
Please Input New Password.
Reconfirm New Password.
6 Enter the same password that you have entered in step 5.
If a different password is entered, the operation goes back to step 5
for reentry from the beginning.
You can try up to three times to reconfirm the new password before
the Change Password screen is automatically exited.
7 Press HOME MENU to exit the menu.
Note
• Take a note of the newly set password and keep it handy.
We suggest you write down your password so you don't forget it.
PDP-LX6090/PDP-LX5090
Your password No.:
Downloaded From TV-Manual.com Manuals

Resetting the password function

1 Press HOME MENU.
2 Select "Setup" (/ then ENTER).
3 Select "Password" (/ then ENTER).
The password entry screen appears. Enter the current four-digit
password using buttons 0 to 9.
4 Select "Reset" (/ then ENTER).
5 Select "Yes" (/ then ENTER).
6 Press HOME MENU to exit the menu.
Note
• The above procedure will reset the password to the factory
default (1 2 3 4).

Disabling the password function

Use the following procedure if you want to deactivate the protection
function that prompts password entry. The factory default is
"Enable".
1 Repeat steps 1 to 3 provided for Resetting the password
function.
2 Select "Password Setting" (/ then ENTER).
3 Select "Disable" (/ then ENTER).
4 Press HOME MENU to exit the menu.
Note
• The above procedure will reset the password to the factory
default (1 2 3 4).
• After disabling the password function, you cannot change the
Channel Lock settings. See Setting Channel Lock on page 28.
• After disabling the password function, you cannot change or
reset the password.
• When you enable the password function again after disabling it,
the factory default password (1 2 3 4) is restored.
• Selecting "France" for "Country" causes the Password Setting
menu to dim and the "Enable" option to be automatically
selected for the menu.

If you forget the password

When the message "Please Input Your Password." is displayed,
press the ENTER button on the remote control unit and hold it
down for three seconds or longer.
The password reverts to "1234".
11
57
En