Care And Maintenance; Water Tank - Sharp UA-KIL80E Bedienungsanleitung

CARE AND MAINTENANCE

CARE INDEX
2
1
3
9
Place
1
Main Body
2

Water Tank

3
Humidifying Filter / Humidifying Tray
4
Sensors
5
HEPA Filter / Deodorizing Filter
Back Panel with Pre-Filter
6 (Only UA-KIL60E)
Back Panel (Only UA-KIL80E)
7
Dust Box (Only UA-KIL80E)
8
Pre-Filter (Only UA-KIL80E)
9
Plasmacluster Ion Generating Unit
MAIN BODY
Wipe with a dry,
soft cloth.
8
7
4
6
5
Page
14
14
15
16
16
16
17
18
19
Always be sure to remove the
power plug from the wall outlet.
FILTER
MAINTENANCE LAMP
When the cumulative operation period or the water
containing period is more than approximately 720
hours, the Filter Maintenance Lamp will turn on.
• The Lamp is off when there is no water fi lled.
(Only UA-KIL80E)
• It will not calculate the time when the product is
unplugged.
• 30 days × 24 hours = 720 hours
This is a reminder to perform the maintenance
described Humidifying Filter and Tray, Main Body,
Back Panel, and Sensors.
After performing maintenance, reset the Filter
Maintenance Lamp.
RESET
WATER TANK
Rinse the inside
with water.
NOTE
How to clean hard to remove dirt.
Tank Cap Toothbrush
EN-14
♪
Touch for
3 sec.
Clean the inside of the
Water Tank with a soft
sponge and the Tank
Cap with a cotton
swab or toothbrush.