Operation; Energy Saving Tips; Using The Cooling Device - Waeco MyFridge MF-05 Bedienungsanleitung

_mf-kuehlschraenke.book Seite 19 Donnerstag, 10. Juni 2010 3:11 15
MF-05, MF-15, MF-18D
6
6.1
6.2
➤ Place the refrigerator on a firm base.
➤ Plug the 12 V connection cable (1 2, page 3) into the DC socket and also
or
➤ Plug the 220-240 V connection cable (1 3, page 3) into the AC voltage
➤ MF-05, MF-15: push the switch (3 3, page 3) on the control panel to
➤ MF-18D: press the "HOT" button (heating, 5 5, page 4) or "COLD"
✓ The refrigerator starts cooling/heating the interior and the appropriate
Downloaded from www.Manualslib.com

Operation

Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for hygienic
reasons (please also refer to the the "Cleaning and maintenance"
chapter on page 20).

Energy saving tips

Choose a well ventilated installation location which is protected against
direct sunlight.
Allow food to cool down first before placing it in the device.
Do not open the cooling device more often than necessary.
Do not leave the door open for longer than necessary.

Using the cooling device

Like every cooling device, your cooler must be properly ventilated
so that any heat created can be drawn off. Otherwise proper func-
tioning cannot be ensured.
Ensure that the ventilation slots are at least 10 cm away from the wall so
that the heat that arises during operation can be drawn off.
into the cigarette lighter or a 12 V socket ...
socket and connect it to the 220-240 V AC mains supply.
"HOT" or "COLD" to switch the device on.
(cooling, 5 2, page 4), to switch on the device.
LED lights up.
Ensure that the objects placed in the refrigerator are suitable for
cooling or heating to the selected temperature.
manuals search engine
Operation
19