Using The Hdmi Control; Using The Hdmi Control Functions; Language - Pioneer PDP-5080XD Bedienungsanleitung

Using the HDMI Control

Chapter 13
Using the HDMI Control

Using the HDMI Control functions

You can operate such Pioneer devices as a recorder, player, AV
system or HD AV Converter that support the HDMI Control
functions using the remote control of the plasma television.
The HDMI Control functions include playback of content using on-
screen control panel on the plasma television, recording of a TV
programme while watching, timer recording using a programme
list on the connected recorder, and confirmation of timer recording
registered in the recorder. For details, see the table below.
Note
• Maximum number of devices that can be connected and
controlled using the remote control unit of the plasma television
is as follows: recorder x 2, player x 2, AV system or HD AV
Converter x 1.
• Not all device operations may be available for HDMI Control
functions.
HDMI Control functions
Function Description
Playback of The proper input source is
content
automatically selected and the
content is played back on the
plasma television as you press
PLAY on the connected device
On-screen Recorder/player operation can be
control controlled on-screen or with the
remote control unit of the plasma
television (play, stop, fast forward/
reverse, etc.)
Recording of The programme now watching can
TV
be recorded using the remote
programme
control unit of the plasma
television
Timer Timer recording using a
recording programme list on the recorder
connected
Confirmation Recording schedule registered in the
of recording
recorder can be displayed and
schedule
confirmed on the screen using the
remote control unit of the plasma
television
Downloaded from www.Manualslib.com
Usable
devices
Recorder/
player
Recorder/
player
Recorder
Recorder
Recorder
manuals search engine
Function Description
Display Information on the display menu

Language

language is transferred to the
Setup
recorder or player connected to the
plasma television. For details, see
the operation manual that came
with the recorder or player.
AV system Receiver/amplifier operation can
control
also be controlled with the remote
control unit of the plasma
television (volume, surround mode
and input selection of the HDMI
terminal)
Power On The connected recorder can be
turned On when the plasma
television is turned On.
The plasma television can be
turned On when the connected
recorder(s) or player(s) is turned
On and images are input to the
plasma television.
Power Off The connected device(s) can be
turned Off when the plasma
television is turned Off
HD AV
An HD AV Converter can also be
Converter
connected and controlled (For
control
details, see page 68)
• Press i+/– or e to adjust
• Press , , , , ENTER,
Note
• When using the HDMI Control functions, operate the remote
control unit while pointing it toward the remote control sensor
(t) located at the bottom right of the front panel of the plasma
television.
• You cannot use two or more HDMI terminals at the rear of the
plasma television at the same time except "Power Off" and
"Display Language Setup" functions.
Usable
devices
Recorder/
player
AV system
Recorder
Recorder/
player
Recorder/
player/AV
system
HD AV
Converter
volume for the AV system.
RETURN ( ) or colour (BLUE,
RED, YELLOW, GREEN) buttons
to use such functions as the disc
navigator and electronic
programme guide (EPG) on the
connected recorder or player.
13
65
En