Auto Off Function; Setting A Programme; Program Change; Programme End - Electrolux TE1120HP Benutzerhandbuch

Push the ON/OFF button.
If the appliance is on, some indicators
appear on the display.

8.4 Auto Off function

To decrease the energy consumption, the
Auto Off function turns the appliance off
automatically:
• if the Start/Pause touch button
is not touched within 5 minutes.
• 5 minutes after a cycle ends.
Push the ON/OFF button to turn on the
appliance.
If the appliance is on, some indications
appear on the display.

8.5 Setting a programme

Use the programme dial to set the
programme.
The time to the programme end comes
into the view on the display.
8.6 Options
Together with the programme you can set
1 or more special options.
To activate or deactivate an option touch
the relevant button or a two button
combination.
its symbol appears on the display or the
led above the corresponding button lights
up.
8.7 Starting a program
To start the program:
Start/Pause button.
Touch the
The appliance starts and the LED above
the button stops flashing and stays on.

8.8 Program change

To change a program:
1. Push the
ON/OFF button to turn
the appliance off.
2. Push the ON/OFF button again to
turn on the appliance.
3. Set a new program.

8.9 Programme end

Clean the filter and drain the
water container after each
drying cycle. (See chapter
CARE AND CLEANING.)
If the drying cycle is completed, the
symbol flashes on the display and the
acoustic signal sounds intermittently for 1
minute.
If you do not turn off the
appliance, the crease guard
phase starts. Laundry can be
removed during this phase.
To remove the laundry:
1. Push the
ON/OFF button for 2
seconds to turn off the appliance.
2. Open the appliance door.
3. Remove the laundry.
4. Close the appliance door.
ENGLISH 39