Troubleshooting - Sony Ericsson HCB-150 Bedienungsanleitung

To adjust the display light
1
Press the menu key.
2
Scroll to Settings and press the menu
key (or ).
3
Scroll to Display brightness and press
the menu key (or ).
4
Select Dim, Normal or Bright.
5
Select Auto brightn. off or Auto
brightn. on. If you select Auto brightn.
on the car speakerphone may adjust
the display brightness, due to the
surrounding light.
6
To return one step at a time, press
To return to idle mode, press and hold
down .
To view the car speakerphone
software version
1
Press the menu key.
2
Scroll to Settings and press the menu
key (or ).
3
Scroll to Service info and press the
menu key (or ). The software version
appears.
10 English
This is the Internet version of the User's guide. © Print only for private use.

Troubleshooting

For product support, go to
www.sonyericsson.com/support.
No connection to the phone
1
Make sure the car speakerphone
is charged and within range of the
phone.
2
Check or redo the Bluetooth settings
in the phone.
3
Try to pair the car speakerphone with
your phone once again.
.
Resetting the car speakerphone
There are two ways to reset the car
speakerphone:
•
Hardware reset – if the car
speakerphone behaves
unexpectedly
•
Master reset – to restore the factory
settings
To perform a hardware reset
1
Make sure the car speakerphone is
turned on.
2
Press and hold down
speakerphone is turned off (after
about 10 seconds).
until the car