Set-Up, Connection, Installation And Initial Start-Up; Choosing A Suitable Location; Positioning - hanseatic HG4585E97636W Gebrauchsanleitung

Page EN-28

Set-up, connection, installation and initial start-up

Set-up, connection, installation and initial start-up

Choosing a suitable location

CAUTION!
Risk of injury!
Improper handling of the appliance
may lead to injuries.
The appliance is heavy and bulky.
■
Seek the help of another person during
transport, installation and assembly.
If a trolley is used to move the appli-
■
ance, the appliance must be moved
as shown on the packaging.
Only lift the appliance as shown on
■
the packaging.
Remove all obstacles on the transport
■
route and from the installation loca-
tion, e.g. open doors and clear away
objects lying on the fl oor.
The planned location must fulfil the following
prerequisites:
– The location must be a dry and frost-safe
room with a firm ground.
– The location must be suitable for a total
weight of 33 kg.
– In order to install the connection pipes,
the dishwasher must be positioned near to
a washing/dishwashing basin.

Positioning

If you wish to install the dishwasher under-
neath a worktop, skip this section and contin-
ue with "Connecting the outlet hose".
1. Remove cardboard, polystyrene and ad-
hesive strips from the inside of the dish-
washer, if you have not already done so.
2. Place the dishwasher in the desired
position.
3. In order to equalise unevenness in the
floor and set up the dishwasher on a level
horizontal base, you can screw the four
adjustable feet in or out. There are slots
in the appliance feet around the circum-
ference. Insert a screwdriver and turn the
appliance foot.
Use a spirit level to set up the dishwasher.