Setting Up Your Pc Software (Based On Windows Xp) - Samsung PS50A470 Bedienungsanleitung

 Energy Saving: Off/Low/Medium/High
This feature adjusts the screen brightness depending on the
surrounding lighting conditions.
− Off: Switches off the Energy Saving mode.
− Low: Operates in standard mode regardless of the
surrounding illumination.
− Medium: Enters Medium power saving mode regardless of
the surrounding illumination.
− High: Enters maximum power saving mode regardless of
the surrounding illumination.
Easy Setting
1 Press the TOOLS button on the remote control.
 Press the ▲ or ▼ button to select Energy Saving.
 Press the ◄ or ► button to select the required option.
 PIP (Picture in Picture): PIP(On/Off)/Source/Size/Position/Programme
You can display a sub picture within the main picture. In this way you can watch TV programme or
monitor the video input from any connected devices.
− PIP: On/Off
You can activate or deactivate the PIP function.
Table of PIP Settings
Main Picture
Component
HDMI1, 2, 3
PC
− Source: TV/Ext.1/Ext./AV
You can select a source of the sub-picture.
− Size: / /
You can select a size of the sub-picture.
➢
If main picture is in PC and Component mode, Size is not available.
− Position: /
You can select a position of the sub-picture.
➢
In Double( ,
− Programme
You can select a channel of the sub-picture only when the Source is set to TV.

Setting up Your PC Software (Based on Windows XP)

The Windows display-settings for a typical computer
are shown below. But the actual screens on your PC will
probably be different, depending upon your particular
version of Windows and your particular video card. But even
if your actual screens look different, the same, basic set-up
information will apply in almost all cases. (If not, contact your
computer manufacturer or Samsung Dealer.)
1 Right click the mouse on the Windows Desktop, then click on
Properties.
The Display Properties will be displayed.
 Click on Settings tab, then set the Display Mode with
reference to the Display Modes Table. You do not need to
change the Colours settings.
 Click on Advanced. A new settings dialog box will be
displayed.
4 Click on the Monitor tab, then set the Screen refresh rate with reference to the Display Modes
Table. Set the Vertical Frequency and Horizontal Frequency individually if you can do so instead of
setting the Screen refresh rate.
5 Click on OK to close the window, then Click on OK button to the Display Properties window.
Automatic re-booting may commence at this moment.
Sub Picture
Analog TV broadcasts
only Ext1, Ext2, AV
/ /
) mode, Position cannot be selected.
English - 
Tools
Anynet+ (HDMI-CEC)
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving ◄ Off
Dual I-II : Mono
Move Adjust
T V PIP
PIP : On
Source : TV
Size :
Position :
Programme : P 1
Move Enter
►
Exit





Return