Safety Precautions - PeakTech 3385 Bedienungsanleitung

1. Safety Precautions

This product complies with the requirements of the following
European Community Directives: 2004/108/EC (Electromagnetic
Compatibility) and 2006/95/EC (Low Voltage) as amended by
2004/22/EC (CE-Marking). Overvoltage category III 600V;
pollution degree 2.
CAT I:
CAT II:
CAT III: Supplied from a cable under earth; fixed installed
CAT IV: Units and installations, which are supplied overhead
To ensure safe operation of the equipment and eliminate the
danger of serious injury due to short-circuits (arcing), the
following safety precautions must be observed.
Damages resulting from failure to observe these safety
precautions are exempt from any legal claims whatever.
*
*
*
*
*
Downloaded from www.Manualslib.com
For signal level, telecommunication, electronic with
small transient over voltage
For local level, appliances, main wall outlets, portable
equipment
switches, automatic cut-off or main plugs
lines, which are stand in a risk of persuade of a
lightning, i.e.
overvoltage-diverter, current use counter.
Do not use this instrument for high-energy industrial
installation measurement.
Do not operate the equipment near strong magnetic fields
(motors, transformers etc.).
Do not place the equipment on damp or wet surfaces.
Do not exceed the maximum permissible input ratings
(danger of serious injury and/or destruction of the
equipment).
The meter is designed to withstand the stated max voltages.
If it is not possible to exclude without that impulses,
transients, disturbance or for other reasons, these voltages
are exceeded a suitable presale (10:1) must be used.
manuals search engine
main-switches on
-18-
current input,