Unloading The Dishwasher; Changing The Dishwasher Programme - hanseatic HG6085E127635W Gebrauchsanleitung

Unloading the dishwasher

CAUTION!
Risk of scalding!
If you open the dishwasher door, hot
steam will come out.
Maintain a suffi cient distance from
■
the door and do not hold your head
or upper body directly above the
open door.
Make sure that children do not open
■
the door if the programme has only
fi nished a short time ago.
Only open the door slightly to allow
■
the steam to escape more easily.
Allow the dishes to cool before un-
■
loading the dishwasher.
CAUTION!
Tripping hazard!
The dishwasher door standing open
can pose a tripping hazard.
Do not leave the dishwasher door
■
completely open.
Make sure that children and pets do
■
not stand on the open door.
Once the programme has come to an end
and the dishes have cooled, you can remove
them.
1. First empty the lower dish rack and the
cutlery basket. This will prevent water
from dripping onto the lower dishes when
emptying the upper dish rack.
2. Leave the dishwasher door slightly open
so that the inside of the dishwasher can
also cool off and dry out.
If no further settings are made, the device will
automatically switch off after 15 minutes.
Dishwasher operation
Changing the dishwasher
programme
CAUTION!
Risk of scalding!
If you open the dishwasher door, hot
steam will come out.
Maintain a suffi cient distance from the
■
door and do not hold your head or up-
per body directly above the open door.
Keep children and pets away from the
■
appliance when opening the door.
Make sure that children do not open
■
the door during operation.
You can interrupt an active dishwasher pro-
gramme at any point and start a new one.
However, do not forget to add extra dish-
washer detergent if the programme has al-
ready been running for a longer period and
the cover of the dishwasher detergent com-
partment is already open.
1. Press the button (13) in order to inter-
rupt the dishwashing programme.
The LED to the right of the programme
symbol will become a solid light.
2. If required, add extra dishwasher detergent.
3. Press and hold the P button (12) until all
the LEDs to the right of the programme
symbols are no longer illuminated.
4. Select the new programme and any addi-
tional options as described at the start of
the chapter.
5. Press the button (13).
The newly selected dishwashing pro-
gramme will start.
Page EN-21
(12) (13)