Pressalit MCT 2 Gebrauchs- Und Pflegeanleitung Seite 18

en
When the battery is running low, a beep tone is heard when you operate
the remote control . Although there is still enough power to raise or lower
the unit, it is of utmost importance that you charge or replace the battery
immediately . Failure to do so will soon cause the lifting function to stop
working .
If the battery has not been used for more than a week, it enters into
standby mode to save power and to protect the battery . Place the battery in
the charger for approx . 15 seconds to exit the standby mode before use .
Please note that there is no audio signal to indicate the standby mode or to
indicate exit of standby mode . If there is still no power after exit of standby
mode, the battery needs to be charged . The battery must be recharged
every 6 months .
18
Place the battery in the charger . Make sure
the battery lock clicks into place .
Mounting instruction Montage-voorschrift
EN NL
Monteringsvejledning Monteringsanvisning
DK SV
Montageanleitung Monteringsveiledning
DE NO
FR Notice de montage ES Instrucciones de montaje
Subject to alteration without further notice · Ret til ændringer forbeholdes · Recht auf Änderungen sind vorbehalten
Nous nous réservons le droit d'apporter toutes modi cations pour l'amélioration de nous produits sans préavis · Wijzigingen voorbehouden
Rätten till ändringar förbehålles · Vi forbeholder oss rett til endringer · Salvo variaciones
CAUTION
!
IMPORTANT
A mounting instruction
for the battery charger is
included and can also be
downloaded from
www .pressalit .com .
Pressalit Telephone: +45 87 88 87 88
Pressalitvej 1 Telefax: +45 87 88 87 89
DK 8680 Ry E-mail: pressalit@pressalit.com
Danmark Web: www.pressalit.com